Whether it's a slow leak that's been eating your subfloor for weeks or a flooded basement at 2am, our Strawn crews are already moving. Hirex Water Damage sends licensed technicians straight to your Strawn address with extraction equipment already loaded and running.
Hirex Water Damage started because homeowners in Strawn, TX kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Strawn roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our crew leads carry IICRC water restoration certifications and have logged real hours on Category 1, 2, and 3 losses, so Structural Drying in Strawn isn't a side service we tacked on — it's the reason the company exists. We carry full general liability coverage and are licensed to operate throughout Strawn, TX, so you're protected from the moment our truck pulls into the driveway.
Because our equipment lives in a Strawn, TX warehouse rather than out of state, we're not waiting on a supply run before we can start extraction.
Anyone in Strawn who has had a supply line fail overnight knows the real cost isn't the leak itself, it's how long the standing water sits before someone with the right equipment arrives. That's the gap Hirex Water Damage was built to close, one Strawn call at a time.
Not every leak announces itself with a flooded floor. A lot of the worst damage we see in Strawn started small and got ignored for weeks. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Strawn dispatcher will give you an honest read on urgency, not a sales pitch.
From a single soaked bedroom to a commercial building with three flooded floors, our Strawn teams are equipped to scale up or down — nothing gets a cookie-cutter response.
Truck-mounted extraction equipment on every Strawn rig pulls high volumes of standing water fast, so drying starts the same day instead of the next. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
Once water is out, we bring in commercial air movers and LGR dehumidifiers, positioned using psychrometric readings rather than guesswork, with daily drying logs so you can see the numbers improving, not just take our word for it.
For Strawn homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
Strawn businesses and property managers get a dedicated project lead, after-hours crews, and equipment scaled to square footage rather than a single-crew response — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Category 3 blackwater calls for full PPE, antimicrobial treatment, and disposal of anything porous that touched the contamination — our Strawn crews are trained for exactly that protocol.
We apply antimicrobial treatment during every Strawn drying job specifically to head off mold before it starts, and we'll flag any area that needs deeper remediation.
Every Strawn estimate is written and explained before work begins — no vague "we'll see how it goes" pricing.
Because our equipment cache sits inside Strawn, TX, most Strawn calls see a technician on-site in under 60 minutes.
Our paperwork is built to match what adjusters expect, and we'll speak with your insurer directly on your behalf.
We don't call a job finished until the moisture meter agrees, and if it doesn't, we return at no additional cost.
A short call with our Strawn dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
Our nearest available Strawn crew is dispatched immediately with truck-mount extraction gear on board.
Standing water comes out first; drying equipment gets placed only after we've mapped exactly where moisture is hiding.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.
We measure moisture with instruments, not guesswork, and we won't sign off on a Strawn job until those readings match the dry standard for the materials involved. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
You'll find that exact commitment printed on your Strawn paperwork, not just mentioned over the phone. We try to send the original technician back for any follow-up so you're not re-explaining the job to someone new.
"Water heater blew at midnight and the Hirex Water Damage crew had extraction equipment running before 1am. Genuinely fast." — Danielle R.
"The team handled every conversation with my adjuster — I never had to explain what psychrometrics meant to anyone." — Marcus T.
"They showed me the daily moisture readings so I wasn't just trusting a stranger's word that the house was dry." — Priya S.
"Our restaurant flooded from a line break in the kitchen and they had us back open in three days flat." — Aaron W.
"They handled a blackwater situation in our basement without making me feel like it was a bigger disaster than it was." — Lena G.
"What they quoted up front is what I paid. No hidden equipment fees." — Sam O.
Most Strawn dispatches are on-site within 60-90 minutes since our crews and equipment are based in-state, not flown or trucked in from elsewhere.
Yes — every Strawn job gets a written estimate before equipment is turned on, and we walk through it with you line by line.
Emergency extraction, structural drying, and sewage/contaminated water cleanup are all available 24/7 for Strawn properties.
Yes, we document everything with photos and moisture readings and can communicate directly with your adjuster.
We take moisture meter readings on affected materials and compare them against the dry standard for that material type — a visual check alone isn't enough.
Blackwater and sewage response is a core part of what our Strawn team does, not a job we sub out.
Turn off the water supply if you can reach it safely, keep people and pets out of the flooded area, and don't run electrical devices near standing water.
We scale crews and equipment for commercial Strawn accounts and assign a dedicated project lead for anything beyond a single unit.
Typical drying time runs 3-5 days for a Strawn home, though a job that sat unaddressed longer can take longer to fully dry.
Not if it's addressed quickly — mold generally needs 24-48 hours of sustained moisture, which is exactly why fast extraction matters.
Our Strawn guarantee covers a 30-day callback window — if moisture shows up again from the same loss, we come back free of charge.
See the zip codes and nearby cities listed below — our Strawn crews cover that full radius.
Strawn is our home base, and our reach extends across Strawn, TX through a network of staged equipment and on-call technicians. If your address falls inside or near Strawn, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Strawn, Strawn, TXCall now and speak with a real Strawn dispatcher, not a national call center.
Call +1-844-234-5373